We have created a tool for engineers, designers and anyone else involved in the PCB design or production process, that identifies some common mistakes, the implications these may have on the finished PCB and how to avoid them.
There are many reasons for mistakes. Whether it’s a default in your CAD program which was missed because of a variance, all the way to complex designs which require the implementation of very specific rules. These are the top most common design mistakes we come across. The ultimate goal of this tool is to provide support in producing reliable PCBs.
As always, you can reach out to NCAB’s technical team if there are any questions on this, or anything having to do with your PCB design.
- Annular ring issues
- Plated Through Hole (PTH) to Copper
- Non-plated Through Hole (NPTH) / NPTH slots to copper
- Holes located on edge of surface mount device (SMD) pad, or very close to SMD
- Trace width and isolation spacing doesn’t work with the selected base copper foil thickness
- Stubs (unterminated traces) on copper layer
- Slivers and same net spacing in copper layers
- Copper to edge – distance between copper features and profile
- Improper SMD/BGA pads design
- Soldermask is oversized / lack of oversize in the same design
- Soldermask bridge / web to small
- Coverage of soldermask
- Legend print problems
Sending... Please wait as this can take a while...
To access our tool as a PDF – and learn how you can avoid the most common design mistakes – please complete the short form below.